Constructing a Club
From BelegarthWiki
stuff you need
1: two nickels
2: duct tape or dap contact cement if you want
3: a pool noodle
4: 1/2 inch pvc pipe
5: wal mart camp pad (or what it realy is closed cell foam
6: fabric (for cover) or for an easy club cover a large tube sock
first get some half inch pvc tape two nickels to the ends cut a pool noodle so that it leaves room for your hand and pommel at the handle end (so about 7 inches) tape or glue the pool noodle on put two layers of closed cell foam on the tip then tape or glue a layer of open cell foam (enough to go all the way around the pool noodle) then add the pommel and cloth covering (an easy way to do that is take a very large tube sock and put it over the striking surface so it covers the whole thing) and your done now you have a simple effective kind of ugly (if you used the sock cover) slashing only club